AWARD WINNING HERITAGE
New Reference HDMI represents the pinnacle of achievement for QED HDMI cables benefiting as it does from the application of design secrets uncovered by our state-of the-art HDMI test suite and in-depth knowledge of our experienced engineers.
FULL 4K, 3D, FULL HD 2.0 COMPLIANT
The HDMI Authorised Test Centre measurement for High Speed HDMI is taken at 10.2 Gb/s but QED Reference HDMI has been independently tested in our laboratories at a staggering 21.9 Gb/s using a pseudo-random bit pattern test. This gives the cable nearly five times the capacity required for a Full HD or 3D picture providing an enormous amount of headroom!
INDIVIDUALLY SCREENED TMDS PAIRS
Provides improved interference immunity and protects delicate signals from outside interference for enhanced signal integrity and quality.
AN ALL NEW FLEXIBLE CORDAGE!
Band-pass Filter TechnologyTM allows Reference HDMI to utilise an all new thinner cordage with improved flexibility and minimum bend radius enabling it to be used in tight spaces between the TV or projector and the wall.
BAND PASS FILTER TECHNOLOGYTM
Reference HDMI incorporates a built-in passive bandpass filter which must be sited at the TV end - making the cable directional. This filter effectively removes components of the signal above and below the HDMI band pass frequency which can contribute to unwanted timing errors, known as 'jitter'. The filter is also optimised to ensure the signal level does not drop below the predefined amplitude specified by the HDMI governing body. This has the effect of reducing cable induced timing errors, to half that found in a typical branded cable of the same length and specification.
Integrated ‘Band Pass Filter™’passive band pass equalizer
Individually screened TMDS pairsfor enhanced signal integrity
HDMI Ethernet Channel
Audio Return Channel
Authorised Test Centre certifiedHigh Speed Cable
340MHz pixel clock, Data Rate 10.2 Gb/s
Independently tested to 21.9 Gb/s
Fully 2.0 compliant
4K, 3D, FULL HD compatible
Deep Colour Certified
Ultra Low Jitter typically lessthan 37 pico-seconds
TMDS Data Lane gauge 26 AWG
Minimum clearance 95 mm
Minimum bend radius 8 mm
QED Lifetime Guarantee