|
|
| QED ORIGINAL BI-WIRE MK II |
|
|
Original Bi-Wire Mk2 takes an award-winning design a step further.
Bi-Wire Mk2 uses the same materials technology as QED Original, but has been
designed to allow the full advantages of Bi-Wiring to be heard and enjoyed. A new enhanced geometry ensures stunning clarity and resolution with the added benefit of being more compact and easy to use.
A high performance solution for Bi-Wire equipped Hi-Fi and Home Theatre systems that won’t break the bank.
|
|
In a single wired system unwanted mechanical and electrical resonances appear as distortion at both sets of speaker terminals. Due to the impedance of the cables these distortions will not be entirely cancelled by the amplifier, instead modulating between the two sections of the speaker system, degrading sound quality. With bi-wiring this interaction is minimised as signal distortion is “seen” at the amplifier's output where it can be more effectively cancelled. The purpose of bi-wiring is to present a clean signal at both the bass and treble speaker terminals.
|
All the new bi-wire cables in the Original Range feature an enhanced geometry that minimises cable inductance by precisely spacing opposing sets of conductors. This provides greater high frequency stability, allowing the amplifier to maintain tight control of the speakers throughout the audible range.
|
| Mode of Operation | | Bi-Wire |
| Conductor Section (mm2) | | 4 x 2.50 |
| Conductor Material | | 99.999% OFC |
| Conductor Dielectric | | Polyethylene |
| Loop Resistence (Ohm/m) | | 0.0143 |
| Parallel Capacitance (pF/m) | | 22.00 |
| Loop Inductance (µH/m) | | 0.76 |
| Dissapation Factor (@10Khz) | | 0.004 |
| Overall Size (mm) | | 3.6 x 17 |
| Finish | | Pearl White |
|
| 0.5 |
1.0 |
1.5 |
2.0 |
3.0 |
5.0 |
6.0 |
10.0 |
Custom |
|
|
| |
|
|
|
|
