|
|
|
|
Micro Bi-Wire combines the true performance benefits of bi-wiring with discreet, low-profile double figure 8 construction, small enough to be easily concealed in nearly every domestic situation. It has been designed to extract maximum performance from the growing number of entry-level Hi-Fi and Home Theatre speaker systems equipped with bi-wiring connections.
Micro Bi-Wire offers clear advantages over conventional twin core cables, including higher resolution, improved soundstage image, lower distortion and greater dynamic impact.
|
|
In a single wired system unwanted mechanical and electrical resonances appear as distortion at both sets of speaker terminals. Due to the impedance of the cables these distortions will not be entirely cancelled by the amplifier, instead modulating between the two sections of the speaker system, degrading sound quality. With bi-wiring this interaction is minimised as signal distortion is seen at the amplifier's output where it can be more effectively cancelled. The purpose of bi-wiring is to present a clean signal at both the bass and treble speaker terminals.
|
All the new bi-wire cables in the Original Range feature an enhanced geometry that minimises cable inductance by precisely spacing opposing sets of conductors. This provides greater high frequency stability, allowing the amplifier to maintain tight control of the speakers throughout the audible range.
|
| Mode of Operation | | Bi-Wire |
| Conductor Section (mm2) | | 4 x 1.25 |
| Conductor Material | | 99.999% OFC |
| Conductor Dielectric | | Polyethylene |
| Loop Resistence (Ohm/m) | | 0.0289 |
| Parallel Capacitance (pF/m) | | 32.43 |
| Loop Inductance (΅H/m) | | 0.73 |
| Dissapation Factor (@10Khz) | | 0.002 |
| Overall Size (mm) | | 2.6 x 13.3 |
| Finish | | Pearl White |
|
| 0.5 |
1.0 |
1.5 |
2.0 |
3.0 |
5.0 |
6.0 |
10.0 |
Custom |
|
|
| |
|
|
|
|
